View B39182B9810P810_8387782.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw rx 2in1 filter gsm 1800 / gsm 900 series/type: ordering code: b9810 B39182B9810P810 date: version: august 18, 2010 2.0 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 august 18, 2010 b9810 942.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet application n low-loss 2in1 rf filter for mobile telephone gsm 900 and gsm 1800 systems, receive path (rx) n usable passband: filter 1 (gsm 1800): 75 mhz filter 2 (gsm 900): 35 mhz n unbalanced to balanced operation for all filters n impedance transformation from 50 w to 150 w for both filters n low amplitude ripple n suitable for gprs class 1 to 12 features n package size 1.5 x1.1 x 0.4 mm 3 n approx. weight 0.003g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n rohs compatible n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitive l evel 3 0.18 0.175 0,39 bottom view 0.18 0.075 0.21 0.075 6 7 8 9 10 5 1234 side view 1.1 top view 0.49 0,4 1.5 pin configuration n 1 input [ filter 1] n 4 input [ filter 2 ] n 6,7 output balanced [ filter 2 ] n 8,9 output balanced [ filter 1 ] n 2,3,5,10 case ground 2,3,5,10 4 1 8 7 6 9
3 august 18, 2010 b9810 942.5 / 1842.5 mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics of filter 1 ( gsm 1800 ) temperature range for specification: t = -20 ?c to +75 ?c terminating source impedance: z s =50 w terminating load impedance: z l = 150 w || 15 nh (balanced) min. typ. @25?c max. center frequency f c 1842.5 mhz maximum insertion attenuation a max 1805.0 ... 1880.0 mhz 1.4 1) 1) typical value excluding pcb losses of 0.24 db. 2.4 2) 2) 2.0 db at 25 ? c db amplitude ripple (p-p) da 1805.0 ... 1880.0 mhz 0.7 1.5 3) 3) 1.4 db at 25 ? c db input vswr 1805.0 ... 1880.0 mhz 1.7 2.0 output vswr 1805.0 ... 1880.0 mhz 1.7 2.0 output amplitude balance (|s 31 /s 21 |) 1805.0 ... 1880.0 mhz -1.2 +/-0.8 +1.2 db output phase balance ( f (s 31 ) -f (s 21 )+180?) 1805.0 ... 1880.0 mhz -10 +/-6 +10 ? attenuation a 10.0 ... 940.0 mhz 45 50 db 940.0 ... 1705.0 mhz 28 40 db 1705.0 ... 1785.0 mhz 12 4) 4) 14.0 db at 25 ? c 16 db 1920.0 ... 1980.0 mhz 17 5) 5) 20.0 db at 25 ? c 23 db 1980.0 ... 2030.0 mhz 25 30 db 2030.0 ... 2400.0 mhz 28 33 db 2400.0 ... 2500.0 mhz 32 37 db 2500.0 ... 2775.0 mhz 28 31 db 2775.0 ... 2880.0 mhz 38 46 db 2880.0 ... 3610.0 mhz 28 44 db 3610.0 ... 3760.0 mhz 38 43 db 3760.0 ... 5415.0 mhz 28 36 db 5415.0 ... 5640.0 mhz 32 36 db 5640.0 ... 6000.0 mhz 28 35 db
4 august 18, 2010 b9810 942.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet maximum ratings of filter 1 operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 1 negative & 1 positive pulse. v machine model, 1 pulse input power at gsm 850, gsm 900 p in 15 dbm effective power in the on-state, gsm 1800, gsm 1900 p in 15 dbm duty cycle 4:8 tx bands
5 august 18, 2010 b9810 942.5 / 1842.5 mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function of filter 1 - narrowband transfer function of filter 1 - wideband
6 august 18, 2010 b9810 942.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet smith charts filter 1 s 11 function s 22 function
7 august 18, 2010 b9810 942.5 / 1842.5 mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics of filter 2 ( gsm 900 ) temperature range for specification: t = -20 ?c to +75 ?c terminating source impedance: z s = 50 w terminating load impedance: z l = 150 w || 72 nh (balanced) min. typ. @25?c max. center frequency f c 942.5 mhz maximum insertion attenuation a max 925.0 ... 960.0 mhz 1.2 1) 1) typical value excluding pcb losses. 2.3 2) 2) 1.9 db at 25?c db amplitude ripple (p-p) da 925.0 ... 960.0 mhz 0.5 1.5 3) 3) 1.2 db at 25?c db input vswr 925.0 ... 960.0 mhz 1.6 2.0 output vswr 925.0 ... 960.0 mhz 1.6 2.0 output amplitude balance (|s 31 /s 21 |) 925.0 ... 960.0 mhz -1.2 +/-0.8 +1.2 db output phase balance ( f (s 31 ) -f (s 21 )+180?) 925.0 ... 960.0 mhz -10 +/-3 +10 ? attenuation a 10.0 ... 480.0 mhz 45 55 db 480.0 ... 900.0 mhz 30 34 db 900.0 ... 905.0 mhz 27 31 db 905.0 ... 915.0 mhz 20 4) 4) 23 db at 25?c 30 db 980.0 ... 1000.0 mhz 25 28 db 1000.0 ... 1850.0 mhz 28 31 db 1850.0 ... 1920.0 mhz 40 44 db 1920.0 ... 3700.0 mhz 35 39 db 3700.0 ... 6000.0 mhz 33 37 db
8 august 18, 2010 b9810 942.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet maximum ratings of filter 2 operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 100 1) 1) acc. to jesd22-a115a (machine model), 1 negative & 1 positive pulse. v machine model, 1 pulse input power at gsm 850, gsm 900 p in 15 dbm effective power in the on-state, gsm 1800, gsm 1900 p in 15 dbm duty cycle 4:8 tx bands
9 august 18, 2010 b9810 942.5 / 1842.5 mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function of filter 2 - narrowband transfer function of filter 2 - wideband
10 august 18, 2010 b9810 942.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet smith charts filter 2 s 11 function s 22 function
11 august 18, 2010 b9810 942.5 / 1842.5 mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2010. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices. references type b9810 ordering code B39182B9810P810 marking and package c61157-a8-a18 packaging f61074-v8227-z000 date codes l_1126 s-parameters b9810_lb_nb.s3p, b9810_lb_wb.s3p b9810_ub_nb.s3p, b9810_ub_wb.s3p see file header for port/pin assignment table soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. matching coils see http:// www .tdk.co.jp/tefe02/coil.htm#aname1 http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2010. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
12 august 18, 2010 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, deltacap, digisimic, dssp, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39182B9810P810

	To Download B39182B9810P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .